Part: OEM replacement touch screen assembly for the Motorola Moto G5
Warranty: 12 Months
Compatibility: Motorola Moto G5
Parts Origin - OEM
The term OEM stands for 'Original Equipment Manufacturer', the exact meaning differs in several industries.
To us, OEM means that the part is the same part used within your device, using the same materials and specifications.
We use the term OEM to cover many parts from refurbished, used and new components, the exact condition will be stated in the items description.
In some cases when the part supplied is made up to several components (for example an LCD assembly) the part may have been assembled by a 3rd party vendor using OEM parts meaning that consumable may differ (such as adhesive used)
Although strict testing procedures are put in place to ensure the quality of the part these testing practices and procedures may differ from the checks manufacturers use.
Any hardware supplied as OEM will not have any quality loss or loss of features and covered under our extensive returns policy.
As in many cases we dont obtain directly from the devices manufacturer, nor in some cases are we affiliated with device manufacturer in any way and they are not involved in the testing or sales process of the component we sell.
The moto G5 screen is held in with tape along the edges. You will need to buy some tape 2mm wide or less to fit the screen, I couldn't find anywhere selling pre cut adhesive tape. Before removing the glass, remove the battery and unscrew the top rear plastic cover to expose the circuit board. The screen connector is on the left of the circuit board. To remove the glass you need to heat around the edge with hot air being careful not to overheat and distort the plastic phone body. Gently prise the screen away from the sticky black tape using a metal spudger tool with a long thin flat edge. Working from either end it will slowly come away, but requires more heating as you work. There is one ribbon cable connected at the top of the screen which feeds through the phone body to the circuit board. The circuit board has a couple of screws which can be removed and then will lift enough to feed the cable through. The finger sensor at the bottom of the screen is stuck on and will come away from the screen. This can be stuck back onto the replacement screen if the tape around it is not damaged. Be very careful with the button placement as it needs to be flush with the glass before fitting the new screen in place.
30 Day Return If You're Not Completely Satisfied
12 Month Warranty On Most Items
Customer Support We're Here To Help
European Shipping From Just £2.40