Replacement with ic connector and home button for iPad Mini, iPad Mini 2

For Apple iPad Mini / iPad Mini Retina - Digitizer Touch Screen Glass Replacement With IC Connector And Home Button - Black

Apple iPad Mini & Mini 2 replacement digitizer - No soldering required - Ready to fit
In stock
SKU
RBSKU0945
£19.50 £16.25
Ask a Question
Apple iPad Mini & Mini 2 replacement digitizer - No soldering required - Ready to fit

Need help with this product?

Visit our forum for fast, free, expert advice from Replace Base staff and independent techies.

 

iPad Mini + iPad Mini Retina digitizer assembly, no soldering required, this assembly already has the connector IC and home button soldered into place - Adhesive is already applied and ready for fitting.

This assembly is the best quality available, using an Apple Apple home cable and button (Apple part number 821-1540) Apple Apple IC connector (Apple part number 820-3201) and Apple Apple digitizer panel and cable (Apple part number 821-1579) The glass panel has anti-scratch coating and is made form the same glass and to the same specifications as the Apple with absolutely no loss of quality.

PLEASE NOTE: A lot of iPad Mini digitizer assemblies on the market do not come with the sensor chip included, this means that official and non-official Smart Covers and Smart Cases will not have the sleep / wake function, our digitizers have the sensor included and are compatible with all Smart Covers / Smart Cases

Part: Apple iPad Mini replacement digitizer / touch screen assembly with IC and button already soldered

Condition: Factory new

Warranty: 12 Months

Compatibility:

Apple iPad Mini 3G & Wi-Fi

Apple iPad Mini Wi-Fi

Apple iPad Mini Retina (Mini 2) 3G & Wi-Fi

Apple iPad Mini Retina (Mini 2) Wi-Fi


Assembly included:

Apple iPad Mini replacement digitizer panel

Apple iPad Mini digitizer adhesive

Apple iPad Mini plastic home button

Apple iPad Mini internal button cable with wake / sleep sensor

Apple iPad Mini IC connector

Apple iPad Mini front camera bracket



What is a Digitizer?
The Digitizer is the touch panel that sits over the LCD screen. The digitizers job is to detect and map your fingers movements across the screen and let the phone know where your finger is.
The digitizer panel is a clear panel, usually bonded underneath or inside the front glass or plastic the sits on top of the LCD, they rarely malfunction but are very susceptible to impact damage, scratches and cracks
Common faults / issues with digitizers include:
  • Touch panel no longer responding - if you can se the picture ok but the device is not responding to touch
  • Touching the panel causes unexpected or erratic movements - this will require a replacement digitizer or re-calibration is available on the device
  • Impact damage - glass digitizers are very easily damaged, generally the will crack or shatter - depending on the extent of the damage it may still work but in not advisable due to safety.
  • Scratches - plastic digitizers are very susceptible to scratches, several light scratches build up making the phone look tatty and harder to view
As the digitizer panel sits directly above the LCD panel some impact damage can also cause damage to the LCD.
The general rule is that if the screen is cracked but the picture device is displaying a picture as normal you will just need to replace the digitizer.
More Information
OriginAftermarket
PartTouch Screens
Colour Black
Compatible BrandApple
Compatible ModelsiPad Mini A1432 A1454
Write Your Own Review
You're reviewing:For Apple iPad Mini / iPad Mini Retina - Digitizer Touch Screen Glass Replacement With IC Connector And Home Button - Black
Your Rating

Find your device

Would you like us to send you notifications about discount codes, news and offers?

Remind me later

Thank you! Please check your email inbox to confirm.

Oops! Notifications are disabled.