iPad Mini digitizer assembly, no soldering required, this assembly already has the connector IC and home button soldered into place - Adhesive is already applied and ready for fitting.
The term OEM stands for 'Original Equipment Manufacturer', the exact meaning differs in several industries.
To us OEM means that the part is the exact same part used within your device, we source these from the same vendors the manufacturer use. By definition the part is an original part manufactured by the same vendor / manufacturer in the same way using the same procedures, equipment and processes as the part provided to the manufacture from the Vendor, the only difference is that we dont obtain directly from the devices manufacturer, nor in some cases are we affiliated with device manufacturer in any way.
Just done a repair of the ipad mini digitzer successfully but with some scary moments. Having tested the screen without sealing it in place and everything working fine, I removed the plastic film over the adhesive and fixed the digitizer into place. As soon as I tested it the touch screen went crazy, not responding and moving randomly when picked up. Luckily the new adhesive was not as strong as the original and I managed to remove the digitizer without cracking it. Found out that any of the bare metal showing on the ribbon from the home button and the metal strips at the bottom of the screen needs to be covered with a strip of tape. This was the difference between this product and the original. As soon as i covered the metal parts with tape I replaced the digitizer and it worked perfectly.
30 Day Return If You're Not Completely Satisfied
12 Month Warranty On Most Items
Customer Support We're Here To Help
European Shipping From Just £2.40