Frequently purchased together
CP-302 | High power fume extractor, perfect for soldering workstations, laser machine fume extraction and chemical fume extraction - extracts and stored in the carbon filters, no need to have any external exhaust system.
Great for areas that have poor or little ventilation and exhaust extraction isn't an option.
This unit has a wide variety of uses, for removing dust, smoke, PM2.5 and other harmful gasses.
Long life, universal triple filter system with up to 6 months of every day use that are quick and easy to remove, clean and replace.
Three-layer filter design. Layer by layer filtration to ensure more thorough filtration of harmful fumes. The purification rate is up to 99.97%.
Modular design, layer by layer protection. The first, middle and high efficiency can be replaced separately, the filter life is longer and the cost is lower.
Unique internal sealing structure with special sealing materials, so that harmful gases are filtered throughout the system and removed with higher efficiency.
Built-in circulating air filtration to avoid indoor air conditioning/heating from exhausting air to the outside without damaging the temperature and humidity within the operating range.
- Power: 60W
- Air volume: 3.0 m³/min
- Low noise
- Strong absorption
- High rotating speed
- Main extraction / absorber unit
- 1M Kettle power lead
- All required filters
Each filter has a different life, the guide below is based on 6 hours of use a day.
- Cotton Filter: 7-15 days (can be washed in water and dried several times for maximum use)
- Middle HEPA filter: 3 Months
- Main Carbon filter: 6 Months
- Weight: 9.52kg
Warranty: 12 Months