Part: Apple iPod Touch Digitizer 4G replacement LCD and glass digitizer assembly

Manufacturer P/N:

Digitizer: 821-1174

LCD: 821-1125

Condition: New

This product comes with our Replacebase Unlimited Lifetime Warranty (Terms apply)

Compatibility: Apple iPod Touch 4th generation

Package:

Apple iPod Touch 4G digitizer LCD front assembly

What is an LCD? The LCD (Liquid Crystal Display) displays the image on your phone using the same technology as most flat screenTVs. LCD units are generally very fragile and susceptible to damage.

Common faults / issues with LCDs include:

• Screen looking washed out, very dull colours and less clarity then usual
• Dead pixels - When a pixel on the LCD no longer works, usually visible on a white background it will be a tiny black square
• Stuck Pixel - When a pixel is stuck on a colour, usually visible on any background and will generally be stuck on white, green, blue or red.
• No backlight - When the back light on the LCD fails the picture can be very hard to see.
• Lines on the LCD - these can be a verity of coloured lines displaying horizontally or vertically
• Damaged LCD, generally damaged LCDs can be bruised, cracked or "bleeding" when a black liquid is visible over the picture
• In modern touch screen devices digitizers are fitted over the LCD and respond to touch, these are separate to the LCD, replacing the LCD wont cure issues with the touch panel.

What is a Digitizer? The Digitizer is the touch panel that sits over the LCD screen. The digitizers job is to detect and map your fingers movements across the screen and let the phone know where your finger is. The digitizer panel is a clear panel, usually bonded underneath or inside the front glass or plastic the sits on top of the LCD, they rarely malfunction but are very susceptible to impact damage, scratches and cracks Common faults / issues with digitizers include:

• Touch panel no longer responding - if you can se the picture ok but the device is not responding to touch
• Touching the panel causes unexpected or erratic movements - this will require a replacement digitizer or re-calibration is available on the device
• Impact damage - glass digitizers are very easily damaged, generally the will crack or shatter - depending on the extent of the damage it may still work but in not advisable due to safety.
• Scratches - plastic digitizers are very susceptible to scratches, several light scratches build up making the phone look tatty and harder to view

As the digitizer panel sits directly above the LCD panel some impact damage can also cause damage to the LCD. The general rule is that if the screen is cracked but the picture device is displaying a picture as normal you will just need to replace the digitizer. If you are unsure what parts you need please get in contact