Sony Xperia Z1 replacement rear panel, includes water / dust resistive adhesive seal.
This is this the highest grade after-market panel available and comparable to the OEM Sony service part in regards strength, material and fit - unlike the cheaper copies these rears have a water tight camera lens, strong adhesive and are much harder to break then the cheaper copy versions.
Part: Sony Xperia Z1 Rear panel with bonding adhesive
Warranty: 12 Months
Compatibility: Sony Z1 lh39
When fitting the new rear panel please take the following into consideration:
If your old rear is hard to remove try using a hair-dryer to soften the old adhesive
Ensure you have removed your old NFC antenna from your old rear, this is currently held on using a mild adhesive
Ensure that all old glass and adhesive residue is completely removed from the phones chassis, if needed you can use IPA cleaner or any alcohol based solution (even nail varnish remover!)
Once the new rear has been fitted we recommend using clamps to hold the rear in place overnight to ensure the new adhesive bonds OK, if clamps are not available a heavy book that can place even pressure on the rear will also work fine