The SUGON T26 Precision Soldering Station provides a fast and effective lead-free rapid heating soldering station for precision soldering under the microscope.

This lead-free station can heat up within 2 seconds and is suitable for JBC soldering tips.

This machine is convenient for quick and sustained maintenance of all types of devices, it is innovatively designed, high-quality guarantee and the precision iron head can be used with JBC 210 handle.

Part: Surface mounted device digital soldering station

• - When you find a large solder joint, touch the holder twice with the handle, and the solder station will raise the temperature to the original temperature set by 80 ° C for 15 seconds, until the end, it will recover automatically, convenient and practical, it is no longer necessary to adjust the temperature manually.
  Celsius and fahrenheit temperature display conversion:
  Press in the power-on state at the same time, hold the "up" and "down" keys, which can be switched between degrees celsius or fahrenheit. the unit displays celsius "fa" fahrenheit "℉"
  - Temperature calibration:
•  
  Set the machine temperature to 350 ℃, and when the temperature is stable, place the tip of the soldering iron on the soldering iron to measure the temperature
  At the position of the meter probe, when the temperature tester shows stable, write down the reading value.
  2. press and hold the "ch1" and "ch3" keys at the same time until screen 350 flashes and the screen shows "caltemp" and the machine enters the temperature calibration mode.
  - Bell settings:
•  
  Press and hold the "ch1" key and the "ch2" key at the same time in the on state to turn the bell off or on. When activated, the machine will display "symbols" and beep. The beeper symbol is not displayed when it is off.
  The soldering stations T26D the soldering iron handle is compatible with the soldering iron handle jbc c210.

Turn off the power and avoiding damage PCB during unplugging or plugging in the soldering iron handle

• 1. Plug in the soldering iron handle to the proper host socket.
• 2. Install the heating element
• 3. Place the soldering station and place the soldering iron handle on the bracket.
• 4. Make sure the power cord is plugged in correctly

Specs:

Manufacturer: Sugon

Part Number: T36

Warranty: 12 Months

Condition: New